Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair >> Keyless Control Module Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Control Module Removal/Installation




KEYLESS CONTROL MODULE REMOVAL/INSTALLATION

1. When replacing the keyless control module, perform the following procedure:

- Keyless Control Module Configuration
Keyless Control Module Configuration
- Immobilizer System-related Parts Programming[with advanced keyless system]
(See. Advanced Keyless System)
- Immobilizer system-related parts programming[with keyless entry system]
Keyless Entry System

2. Disconnect the negative battery cable.

3. Remove the front side trim. Front Side Trim Removal/Installation

4. Remove the nut and screw.






5. Remove the connector clip installed to the bracket by shifting the keyless control module downward.

6. Disconnect the keyless control module connector.

7. Install in the reverse order of removal.

pro multis · About Operation CHARM