Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Testing and Inspection




CRUISE CONTROL SWITCH INSPECTION [MZR 1.5]

1. Switch the ignition to off.

2. Disconnect the negative battery cable and wait for 1 min or more.

3. Remove the driver-side air bag module. Driver-Side Air Bag Module Removal/Installation

4. Disconnect the clock spring connector (part wiring harness-side).

5. Inspect for resistance and continuity between clock spring terminals B and D (part wiring harness-side) using a tester.






- If not as specified, replace the audio control switch. Service and Repair





6. Apply battery positive voltage to clock spring terminal G (part wiring harness-side) and terminal E (part wiring harness-side) to ground.






7. Verify that the LED illuminates.

- If the LED does not illuminate, replace the audio control switch. Service and Repair

pro multis · About Operation CHARM