Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module (BCM) Bracket Removal/Installation




BODY CONTROL MODULE (BCM) BRACKET REMOVAL/INSTALLATION

Removal

1. Disconnect the negative battery cable.

2. Remove the dashboard under cover. Dashboard Under Cover Removal/Installation

3. Remove the glove compartment. Service and Repair

4. Remove the BCM. Body Control Module (BCM) Removal/Installation

5. Insert a fastener remover in the direction of the arrow (1) shown in the figure and release the tabs.

CAUTION:
- Because the tabs will break if they are bent excessively, bend the tabs only so far as to allow them to release from the BCM.





6. Pull the BCM in the direction of the arrow (2) as shown in the figure and remove the BCM bracket.






Installation

1. Bend the tabs in the direction of the arrow (1) so that clearance (a) indicated in the figure is within the specification.






Clearance
- a: 0.8-1.2 mm {0.032-0.047 in}

2. Press the BCM in the direction of the arrow (2) as shown in the figure and install it.






3. Install the BCM. Body Control Module (BCM) Removal/Installation

4. Install the glove compartment. Service and Repair

5. Install the dashboard under cover. Dashboard Under Cover Removal/Installation

6. Connect the negative battery cable.