Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Steering >> Steering Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Control Module: Testing and Inspection




EPS CONTROL MODULE INSPECTION

1. Remove the side wall. Side Wall Removal/Installation

2. Remove the front console component. Front Console Component Removal/Installation

3. Remove the front scuff plate (LH) and front side trim (LH). Front Scuff Plate Removal/Installation Front Side Trim Removal/Installation

4. Disconnect the hood release lever from the lower panel. Service and Repair

5. Remove the lower panel. Lower Panel Removal/Installation

6. Remove the heat duct (LH). Heater Duct Component Removal/Installation

7. Attach the tester lead to the underside of the EPS CM connector and inspect the voltage according to the terminal voltage table (reference).

Terminal Voltage Table (Reference)









pro multis · About Operation CHARM