Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Testing and Inspection >> Programming and Relearning >> EPS Steering Angle Calibration
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EPS Steering Angle Calibration




EPS STEERING ANGLE CALIBRATION

CAUTION:
- If the EPS steering angle calibration is not completed, the EPS will not operate properly. If the EPS warning light illuminates or flashes when the engine is started and the steering wheel is turned lock-to-lock after the following procedure, always perform the EPS system steering angle calibration so that the EPS operates properly.

- Steering column (EPS CM) removal/installation
- Intermediate shaft disconnection

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the IDS.
a. Select "Chassis".

b. Select "EPS Steering Angle Calibration".

3. Then, select an item from the screen menu.
1 "Calibration after Parts Removal or Replacement"

- Used after part removal/installation or replacement

- "Restoration Procedure for DTC C1B00 95"

- Used when DTC C1B00:95 is stored

- "Restoration Procedure for DTC C1B00 54"

- Used when DTC C1B00:54 is stored

4. Perform the procedure according to the directions on the screen.

pro multis · About Operation CHARM