Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Testing and Inspection




TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [FN4A-EL]

CAUTION:
- Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

On-Vehicle Inspection

1. Disconnect the coupler component connector.
a. Disconnect the negative battery cable.

b. Disconnect the coupler component connector.






2. Measure the resistance between the coupler component terminals E and H.






- If there is any malfunction, replace the TFT sensor. Service and Repair

TFT sensor specification





Off-Vehicle Inspection

1. Place the TFT sensor and a thermometer in ATF as shown, and heat the ATF gradually.






WARNING:
- A hot ATF and beaker can cause severe burns. Do not touch them.

2. Measure the resistance between the coupler component terminals E and H.






- If there is any malfunction, replace the TFT sensor.

TFT sensor specification





pro multis · About Operation CHARM