Primary Shaft Components Disassembly
PRIMARY SHAFT COMPONENTS DISASSEMBLY1. Disassemble in the order indicated in the table.
Bearing (4th Gear End) Disassembly Note
1. Remove the bearing using the SST.
3rd/4th Clutch Hub Component, 3rd Synchronizer Ring and 3rd Gear Disassembly Note
1. Remove the retaining ring.
2. Remove the 3rd/4th clutch hub component, 3rd synchronizer ring, and 3rd gear using the SST.
Bearing (Primary Shaft End) Disassembly Note
1. Remove the bearing using the SST.
Caution: Use protective plates in the vise to prevent damage to the primary shaft gear.