Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 3 L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Seals and Gaskets >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair




OIL SEAL (DIFFERENTIAL) REPLACEMENT [G35M-R]

1. On level ground, jack up the vehicle and support it evenly on safety stands.

2. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

3. Drain the oil from the transaxle. Transaxle Oil Replacement

4. Remove the front splash shield. Splash Shield Removal/Installation

5. Separate the drive shaft and joint shaft from the transaxle. Drive Shaft Removal/Installation Joint Shaft Removal/Installation

6. Remove the oil seals using a screwdriver.






7. Using the SST and a hammer, tap each new oil seal in evenly until the SST contacts the transaxle case.






8. Coat the lip of each oil seal with transaxle oil.

9. Insert the drive shaft and joint shaft to the transaxle. Drive Shaft Removal/Installation Joint Shaft Removal/Installation

10. Install the front splash shield. Splash Shield Removal/Installation

11. Add the specified amount and type of oil. Transaxle Oil Replacement

12. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

pro multis · About Operation CHARM