Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 3 L4-2.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt Buckle Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Belt Buckle Switch: Testing and Inspection




BUCKLE SWITCH INSPECTION

Driver Side

1. Switch the ignition to off.

2. Disconnect the negative battery cable.

3. Remove the front seat. Removal and Replacement

4. Remove the front buckle. Front Buckle Removal/Installation

5. Inspect for continuity between the buckle switch terminals using a tester.






- If not as indicated in the table, replace the driver side front buckle.





Passenger Side

1. Connect the M-MDS to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "DataLogger".
2 Select "Modules".
3 Select "RCM".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "RCM".
3 Select "DataLogger".

3. Verify that it is displayed according to the table using "BUCKLE_P".





- If not as indicated in the table, replace the passenger side front buckle.

pro multis · About Operation CHARM