Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> Tribute 2WD L4-2.5L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Overhaul >> Front Seat >> Lumbar Assembly Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lumbar Assembly Removal/Installation




LUMBAR ASSEMBLY REMOVAL/INSTALLATION

NOTE:The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a SRS fault.
NOTE:The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
1. Depower the SRS. See Supplemental Restraint System (SRS) Depowering And Repowering.

2. Remove the front seat backrest cover. See Front Seat Backrest Cover Removal/Installation.

3. Remove the backrest foam pad.

4. Remove the 2 screws and position aside the lumbar adjust control.

5. Release the lumbar support from the backrest frame wires and remove.

6. To install, reverse the removal procedure.

7. Install the front seat backrest cover. See Front Seat Backrest Cover Removal/Installation.

8. Repower the supplemental restraint system (SRS). See Supplemental Restraint System (SRS) Depowering And Repowering.

pro multis · About Operation CHARM