Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> Tribute 2WD L4-2.5L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Windshield Wiper Motor Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Motor Removal/Installation




WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION

NOTE:A new wiper motor assembly comes with the linkage arm installed.
1. Remove the wiper mounting arm and pivot shaft. See Wiper Mounting Arm And Pivot Shaft Removal/Installation.





2. Separate the wiper motor linkage arm from the wiper mounting arm and pivot shaft assembly.

- Use a suitable tool at the location shown to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.

CAUTION:Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
3. Remove the 3 bolts and the wiper motor.

- To install, tighten to 13 Nm {1.3 kgf-m, 115 in-lbf}.

4. To install, reverse the removal procedure.

pro multis · About Operation CHARM