Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> Tribute 4WD V6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Catalytic Converter >> Service and Repair >> Catalytic Converter Removal/Installation - RH
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Catalytic Converter Removal/Installation - RH




CATALYTIC CONVERTER REMOVAL/INSTALLATION - RH, 3.0L

1. Remove the exhaust crossover pipe. See - Service and Repair.

2. Disconnect the RH catalyst monitor sensor electrical connector.

3. Remove and discard the 3 RH catalytic converter nuts and remove the converter.

- Discard the RH catalytic converter gasket.
- To install, tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.

4. To install, reverse the removal procedure.

- Install a new gasket and nuts.

pro multis · About Operation CHARM