Gear Shift Indicator (GSI) is not displayed

1. Gear Shift Indicator (GSI) is not displayed diagnostics

1. Pre-check and visual inspection

1) Check for any interference from aftermarket electronic components such as two-way radios or lights.

Turn OFF or remove any aftermarket electronic components to ensure that there is no influence on inspections or operations.

2) If the gear shift indicator (GSI) screen is not displayed, change the screen to display it.

2. Components inspection

1) Inspect the instrument panel cluster.

2) Perform the instrument panel cluster self-diagnosis.

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. instrument panel cluster diagnostics".

3) If a malfunction is found in the instrument panel cluster, replace it.

Caution

  • If the instrument panel cluster is replaced with a new one, write the vehicle information to the instrument panel cluster.

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. instrument panel cluster removal".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. instrument panel cluster installation".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. instrument panel cluster setting".

4) Inspect the neutral switch.

Refer to "5.Transmission, Transaxle 5C.Manual(MVL) transmission inspection".

5) Replace the neutral switch if a malfunction is found.

6) Inspect the backup light switch.

Refer to "5.Transmission, Transaxle 5C.Manual(MVL) transmission inspection".

7) If a malfunction is found in the backup light switch, replace it.

8) Inspect the 4WD switch.

Refer to "9.Body, Cab, Accessories 9C.Electrical Control, Entertainment 4WD switch inspection".

9) Replace the 4WD switch if a malfunction is found.