DTC P0500[87] Invalid Data Received from Vehicle Speed Sensor (Wireless Access Module (Hi-version [Passive Entry and Start System]))

1. Wireless access module system check

Refer to "71.Security and Locks Control 10S.Troubleshooting(Wireless Access Module (Hi-version [Passive Entry and Start System])) Diagnostic system check-Wireless Access Module (Hi-version[Passive Entry and Start System])".

2. Engine control system inspection

1) Observe the DTC information for the engine control system with a scan tool.

2) If a DTC is set, repair the applicable DTC.

Procedure completion

=>Go to Repair verification.

3. Repair verification

1) Clear the DTC with a scan tool.

2) Turn OFF the ignition switch.

3) Start the engine and operate the vehicle.

4) Clear the DTC with a scan tool.