Refer to "75.Driver Assistance System 10W.Troubleshooting(Stereo Camera) diagnostic system check-stereo camera".
1) Check the stereo camera installation position.
Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera installation".
2) If the stereo camera installation position is improper, adjust the installation position.
Procedure completion
=>Go to Stereo camera learning.
1) Perform the stereo camera learning.
Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera writing".
Procedure completion
1) Clear the DTC with a scan tool.
2) Turn OFF the ignition switch for 30 seconds or more.
3) Turn ON the ignition switch.
4) Observe the DTC information with a scan tool.