REAR SEAT BACK LATCH REMOVAL/INSTALLATION

id091300809400

Rear Seat Back Latch(LH,RH)

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)

(2)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(3)  Head restraint

(4)  Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)

(5)  Rear seat back frame (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

3.  Remove the screws.

ac5wzw00013748

4.  Disengage the tabs and remove the rear seat back latch cover.

5.  Disconnect the cable from the hook.

ac5wzw00013749

6.  Remove the rear seat back latch.

7.  Insert the screwdriver in the position shown in the figure.

ac5wzw00013750

8.  Remove the shaft.

9.  Remove the recliner lever.

10.  Remove the screws.

ac5wzw00013751

11.  Remove the rear seat belt guide base.

12.  Remove the bolts.

ac5wzw00013752

13.  Remove the rear seat back latch.

14.  Install in the reverse order of removal.

Rear Seat Back Latch(Center)