GPS ANTENNA FEEDER INSPECTION
id092000802100
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Lower decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
-
- (2) Upper decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
-
- (3) Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)
-
- (4) Meter hood No.1 (See METER HOOD REMOVAL/INSTALLATION.)
-
- (5) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
-
- (6) GPS antenna (See GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION.)
-
- (7) Center display component (See CENTER DISPLAY REMOVAL/INSTALLATION.)
-
- (8) GPS antenna feeder (See GPS ANTENNA FEEDER REMOVAL/INSTALLATION.)
-
3. Verify that the continuity is as indicated in the table.
