BACKUP POWER SUPPLY REMOVAL/INSTALLATION

id092100909000

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Tonneau cover (See TONNEAU COVER REMOVAL/INSTALLATION.)

(2)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)

(3)  Bass-box (with Bose®) (See BASS-BOX REMOVAL/INSTALLATION.)

(4)  Sub-trunk (See SUB-TRUNK REMOVAL/INSTALLATION.)

(5)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3.  Pull back the trunk side trim (LH) to a position which allows for the removal of the backup power supply. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

ac5wzw00010714

5.  Remove the nuts.

6.  Remove the backup power supply.

7.  Install in the reverse order of removal.