DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

id0802g7080700

Caution

•  When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC				System malfunction location	Fail-safe function	Drive cycle	Self test type*1	Memory function	Page
M-MDS display	Air bag system warning light
	Flashing pattern		Priority ranking
B0001:11	19		18	Driver-side air bag module (inflator No.1) circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0001:12				Driver-side air bag module (inflator No.1) circuit short to power supply	—	—	C, D	×
B0001:13				Driver-side air bag module (inflator No.1) circuit open circuit or resistance high	—	—	C, D	×
B0001:19				Short circuit to driver-side air bag module (inflator No.1) and other air bag module circuits	—	—	C, D	×
B0001:1A				Driver-side air bag module (inflator No.1) circuit resistance low	—	—	C, D	×
B0001:55	54		7	Configuration setting error (driver-side air bag module (inflator No.1) structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:11	21		17	Passenger-side air bag module (inflator No.1) circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:12				Passenger-side air bag module (inflator No.1) circuit short to power supply	—	—	C, D	×
B0010:13				Passenger-side air bag module (inflator No.1) circuit open circuit or resistance high	—	—	C, D	×
B0010:19				Short circuit to passenger-side air bag module (inflator no.1) and other air bag module circuits	—	—	C, D	×
B0010:1A				Passenger-side air bag module (inflator No.1) circuit resistance low	—	—	C, D	×
B0010:55	54		7	Configuration setting error (passenger-side air bag module (inflator No.1) structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0050:55	54		7	Configuration setting error (driver-side buckle switch structural malfunction)	—	—	C, D	×	(See DTC B0050:55/B0052:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0052:55				Configuration setting error (passenger-side buckle switch structural malfunction)	—	—	C, D	×
B0094:11	42		10	Driver-side crash zone sensor or passenger-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:12/B0094:29/B0094:2B/B0094:4A/B0094:87/B0094:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0094:12				Driver-side crash zone sensor or passenger-side side air bag sensor No.2 circuit short to power supply	—	—	C, D	×
B0094:29				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:2B				Short circuit to driver-side crash zone sensor or passenger-side side air bag sensor No.2 and other air bag sensor circuits	—	—	C, D	×
B0094:4A				Driver-side crash zone sensor ID error (assembly incorrect)	—	—	C, D	×
B0094:87				Signal reception error from driver-side crash zone sensor	—	—	C, D	×
B0094:96				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:55	54		7	Configuration setting error (driver-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B00D2:01	―	―	―	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B00D2:29	―	―	―	Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:11	43		14	Driver-side side air bag sensor No.1 or passenger-side pressure sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FD:11/B10FD:12/B10FD:29/B10FD:2B/B10FD:4A/B10FD:87/B10FD:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:12				Driver-side side air bag sensor No.1 or passenger-side pressure sensor circuit short to power supply	—	—	C, D	×
B10FD:29				Driver-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FD:2B				Short circuit to driver-side side air bag sensor No.1 or passenger-side pressure sensor and other air bag sensor circuits	—	—	C, D	×
B10FD:4A				Driver-side side air bag sensor No.1 ID error (assembly incorrect)	—	—	C, D	×
B10FD:87				Signal reception error from driver-side side air bag sensor No.1	—	—	C, D	×
B10FD:96				Driver-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FD:55	54		7	Configuration setting error (driver-side side air bag sensor No.1 structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:11	44		13	Passenger-side side air bag sensor No.1 or driver-side pressure sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FE:11/B10FE:12/B10FE:29/B10FE:2B/B10FE:4A/B10FE:87/B10FE:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:12				Passenger-side side air bag sensor No.1 or driver-side pressure sensor circuit short to power supply	—	—	C, D	×
B10FE:29				Passenger-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FE:2B				Short circuit to passenger-side side air bag sensor No.1 or driver-side pressure sensor and other air bag sensor circuits	—	—	C, D	×
B10FE:4A				Passenger-side side air bag sensor No.1 ID error (assembly incorrect)	—	—	C, D	×
B10FE:87				Signal reception error from passenger-side side air bag sensor No.1	—	—	C, D	×
B10FE:96				Passenger-side side air bag sensor No.1 internal malfunction	—	—	C, D	×
B10FE:55	54		7	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:11	22		25	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:12				Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13				Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19				Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A				Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55	54		7	Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:11	23		24	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:12				Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13				Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19				Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A				Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55	54		7	Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:11	24		27	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:12				Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13				Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19				Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A				Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55	54		7	Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:11	25		26	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:12				Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13				Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19				Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A				Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55	54		7	Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1196:29	45		16	Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×	(See DTC B1196:29/B1196:4A/B1196:87/B1196:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1196:4A				Driver-side side air bag sensor No.2 ID error (assembly incorrect)	—	—	C, D	×
B1196:87				Signal reception error from driver-side side air bag sensor No.2	—	—	C, D	×
B1196:96				Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
B1196:55	54		7	Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×	(See DTC B1196:55/B1197:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1197:29	46		15	Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×	(See DTC B1197:29/B1197:4A/B1197:87/B1197:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1197:4A				Passenger-side side air bag sensor No.2 ID error (assembly incorrect)	—	—	C, D	×
B1197:87				Signal reception error from passenger-side side air bag sensor No.2	—	—	C, D	×
B1197:96				Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
B1197:55	54		7	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B1196:55/B1197:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1206:00	―	―	―	SAS control module collision judgement signal output (fuel cut off signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:11	38		22	Driver-side front pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:12				Driver-side front pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13				Driver-side front pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19				Short circuit to driver-side front pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A				Driver-side front pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55	54		7	Configuration setting error (driver-side front pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:11	39		21	Passenger-side front pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:12				Passenger-side front pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13				Passenger-side front pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19				Short circuit to passenger-side front pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A				Passenger-side front pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55	54		7	Configuration setting error (passenger-side front pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1410:11	33		29	Driver-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1410:11/B1410:12/B1410:13/B1410:19/B1410:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1410:12				Driver-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1410:13				Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1410:19				Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1410:1A				Driver-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1410:55	54		7	Configuration setting error (driver-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1410:55/B1412:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1412:11	32		28	Passenger-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1412:11/B1412:12/B1412:13/B1412:19/B1412:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1412:12				Passenger-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1412:13				Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1412:19				Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1412:1A				Passenger-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1412:55	54		7	Configuration setting error (passenger-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1410:55/B1412:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1417:11	41		9	Passenger-side crash zone sensor or driver-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See DTC B1417:11/B1417:12/B1417:29/B1417:2B/B1417:4A/B1417:87/B1417:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1417:12				Passenger-side crash zone sensor or driver-side side air bag sensor No.2 circuit short to power supply	—	—	C, D	×
B1417:29				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:2B				Short circuit to passenger-side crash zone sensor or driver-side side air bag sensor No.2 and other air bag sensor circuits	—	—	C, D	×
B1417:4A				Passenger-side crash zone sensor ID error (assembly incorrect)	—	—	C, D	×
B1417:87				Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
B1417:96				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:55	54		7	Configuration setting error (passenger-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B143A:00	―	―	―	SAS control module collision judgement signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1A55:00	―	―	―	SAS control module collision judgement signal output (collision detection signal for MAZDA ERA-GLONASS output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
C0062:29				Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29				Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	―	Continuously illuminated	1	Unit communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0100:00/U0101:00/U0155:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U0100:00	14		5	Communication error with PCM	—	—	C, D	×
U0101:00				Communication error with TCM	—	—	C, D	×
U0155:00				Communication error with instrument cluster	—	—	C, D	×
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U2100:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U2107:00	―	―	―	SAS control module collision judgement signal output (secondary collision reduction signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3000:49	―	Continuously illuminated	1	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
	12		2
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (8 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3003:17				SAS control module power supply voltage increases (16 V or more)	—	—	C, D	×

Inspection for DTCs not usually displayed so the related function is not equipped

Diagnostic procedure

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY •  Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)
		No	Go to the next step.
2	VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) •  Are the same DTCs displayed?	Yes	Go to the next step.
		No	DTC troubleshooting completed.
3	VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR •  Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA) [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].) •  Are the same DTCs displayed?	Yes	Re-perform the configuration, then perform the DTC inspection. •  If the same DTC is displayed, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)
		No	DTC troubleshooting completed.