 |
ac8wzw00004275
REAR COMBINATION LIGHT INSPECTION
id091800821000
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the rear combination light from the body. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
3. Disconnect the rear combination light short-cord from the rear combination light. (See REAR COMBINATION LIGHT SHORT-CORD REMOVAL/INSTALLATION.)
4. Apply battery positive voltage and connect the ground to the rear combination light terminals as indicated in the table below and verify that each light turns on normally.
|
Test condition |
+B Terminal |
Ground Terminal |
|---|---|---|
|
Brake light
|
B
|
F
|
|
Taillight
|
C
|
F
|
ac8wzw00004275
|