REAR FOG LIGHT INSPECTION

id091800825100

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Rear splash shield (RH) (See SPLASH SHIELD REMOVAL/INSTALLATION)

(2)  Rear mudguard (RH) (See MUDGUARD REMOVAL/INSTALLATION)

3.  Remove the rear fog light. (See REAR FOG LIGHT REMOVAL/INSTALLATION.)

4.  Apply battery voltage to rear fog light terminal A, and connect terminal C to ground.

ac8jjw00002737

5.  Verify that the rear fog light is turned on.

•  If a rear fog light does not turn on, replace it. (See REAR FOG LIGHT REMOVAL/INSTALLATION.)