 |
ac9wzw00002922
ENGINE DISASSEMBLY/ASSEMBLY [MZI-3.7]
id0110c5800500
1. Remove the transaxle from the engine. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AY6A-EL, AY6AX-EL].)
2. Remove the drive plate. (See DRIVE PLATE REMOVAL/INSTALLATION [AY6A-EL, AY6AX-EL].)
3. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [MZI-3.7].)
4. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)
5. Remove the power steering oil pump. (See POWER STEERING OIL PUMP REMOVAL/INSTALLATION [L.H.D.].)(See POWER STEERING OIL PUMP REMOVAL/INSTALLATION [R.H.D.].)
6. Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [MZI-3.7].)
7. Remove the fuel injector and fuel distributor. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZI-3.7].)
8. Remove the intake-air system. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)
9. Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)
10. Remove the thermostat case and water hose component. (See THERMOSTAT REMOVAL/INSTALLATION [MZI-3.7].)
11. Remove the CHT sensor. (See CYLINDER HEAD TEMPERATURE (CHT) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)
12. Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)
13. Remove the oil pressure switch. (See OIL PRESSURE INSPECTION [MZI-3.7].)
14. Remove the oil cooler. (See OIL COOLER REMOVAL/INSTALLATION [MZI-3.7].)
15. Disassemble in the order indicated in the table.
16. Assemble in the reverse order of disassembly.
ac9wzw00002922
|
|
1
|
No.3 engine mount bracket
|
|
2
|
Transfer bracket
|
|
3
|
Dynamic chamber bracket (engine right side)
|
|
4
|
Dynamic chamber bracket (engine back side)
|
|
5
|
Water inlet pipe
|
|
6
|
KS
|
|
7
|
Oil filter adapter and oil filter
|
Water Inlet Pipe Installation Note
1. Apply clean engine coolant to the O-ring.