FRONT CAMERA REMOVAL/INSTALLATION

id152000103200

1.  Disconnect the negative lead-acid battery terminal. (See NEGATIVE LEAD-ACID BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts.

(1)  Front bumper(See FRONT BUMPER REMOVAL/INSTALLATION [(E)].)

(2)  Upper face(See FRONT BUMPER DISASSEMBLY/ASSEMBLY [(E)].)

3.  Disconnect the connector.

a30zzw00002698

4.  Remove the screws.

5.  Remove the fasteners.

6.  Remove the front camera.

7.  Install in the reverse order of removal.

8.  Perform the 360°view monitor system aiming. (with 360°view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)

9.  Perform the front radar sensor/front side radar sensor aiming. (With front side radar sensor) (See FRONT RADAR SENSOR/FRONT SIDE RADAR SENSOR AIMING.)

10.  Perform the front radar sensor aiming. (Without front side radar sensor) (See FRONT RADAR SENSOR AIMING.)