CABIN TEMPERATURE SENSOR INSPECTION [FULL-AUTO AIR CONDITIONER]
id0740a1807700
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (2) Shift lever knob (MT)
- (3) Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (4) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (5) Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)
- (6) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (7) Front console panel (See FRONT CONSOLE PANEL REMOVAL/INSTALLATION.)
- (8) Front console component (See FRONT CONSOLE REMOVAL/INSTALLATION.)
- (9) Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)
- (10) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (11) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (12) Bonnet release lever (See BONNET RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION.)
- (13) Driver-side lower panel (See DRIVER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)
- (14) Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)
- (15) Center panel No.1 (See CENTER PANEL No.1 REMOVAL/INSTALLATION.)
- (16) Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)
3. Remove the cabin temperature sensor. (See CABIN TEMPERATURE SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)
4. Measure the temperature around the cabin temperature sensor and measure the resistance between cabin temperature sensor terminals A and B.
-
