REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION [5HB]

id0914004304d4

1.  To access the glass installation bolt, position the rear door glass so that the distance from the top of the rear door glass to the upper part of the rear beltline molding is approx. 210 mm {8.27 in}.

am2zzw00002317

2.  Disconnect the negative battery cable.

3.  Remove the following parts:

(1)  Sail inner garnish (See SAIL INNER GARNISH REMOVAL/INSTALLATION.)

(2)  Rear door garnish (See REAR DOOR GARNISH REMOVAL/INSTALLATION.)

(3)  Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(4)  Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION [5HB].)

(5)  Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION.)

(6)  Rear door module panel (See REAR DOOR MODULE PANEL REMOVAL/INSTALLATION.)

(7)  Rear door latch and lock actuator (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION [5HB].)

4.  Remove the screw.

am2zzw00000679

5.  Remove the rear door latch and lock actuator.

6.  Install in the reverse order of removal.