REAR MOUNT CAMERA REMOVAL/INSTALLATION

id092000814900

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Remove the following parts:

(1)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(2)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION [(E)].)

(3)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(4)  Rear package tray (5HB) (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(5)  Trunk side upper trim (5HB) (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(6)  Rear combination light (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

(7)  Rear splash shield (See SPLASH SHIELD REMOVAL/INSTALLATION.)

(8)  Rear bumper (See REAR BUMPER REMOVAL/INSTALLATION.)

3.  Disconnect the connector.

am3zzw00024103

4.  Press the rear mount camera tabs in the direction of arrows (1) shown in the figure, press the rear mount camera in the direction of arrow (2) shown in the figure, and disengage the rear mount camera tabs from the rear bumper.

5.  Remove the rear mount camera.

6.  Install in the reverse order of removal.

7.  Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)