PTC (POSITIVE TEMPERATURE COEFFICIENT) HEATER REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]
id0740a2806900
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (2) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (3) Selector lever knob (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (4) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (5) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (6) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (7) Rear heat duct (1) (See REAR HEAT DUCT REMOVAL/INSTALLATION.)
3. Disconnect the three connectors.
4. Remove the PTC heater connector holder and wiring harness clip.
5. Remove the heater case. (See A/C UNIT REMOVAL/INSTALLATION.)
6. Remove the PTC heater from heater case.
7. Install in the reverse order of the removal.