DTC B109E:83 [BCM]
id0902f5345800
|
DESCRIPTION |
Keyless receiver circuit malfunction |
|---|---|
|
DETECTION CONDITION
|
• BCM receives the erratic signal continuously 12 times.
|
|
POSSIBLE CAUSE
|
• Keyless receiver malfunction
• Keyless control module malfunction (vehicles with advanced keyless entry and push button start system)
• BCM malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM BCM DTC
• Clear the DTC using the M-MDS.
(See CLEARING DTC [BCM].)
• Perform the BCM DTC inspection using the M-MDS.
(See DTC INSPECTION [BCM].)
• Is the same DTC present?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 5.
|
||
|
2
|
INSPECT KEYLESS RECEIVER
• Inspect the keyless receiver.
• Is there any malfunction?
|
Yes
|
Replace the keyless receiver, then go to Step 4.
|
|
No
|
Vehicles without advanced keyless entry and push button start system:
• Go to Step 4.
Vehicles with advanced keyless entry and push button start system:
• Go to the next step.
|
||
|
3
|
INSPECT KEYLESS CONTROL MODULE
• Inspect the keyless control module.
• Is there any malfunction?
|
Yes
|
Replace the keyless control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC using the M-MDS.
(See CLEARING DTC [BCM].)
• Perform the BCM DTC inspection using the M-MDS.
(See DTC INSPECTION [BCM].)
• Is the same DTC present?
|
Yes
|
Replace the BCM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [BCM].)
|
|
No
|
DTC troubleshooting completed.
|
||