DTC B1342 [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY]

id0902k0935600

DESCRIPTION

Information display/multi information display internal malfunction
DETECTION CONDITION
•  Information display/multi information display internal ECU is failed when the ignition is ON.
POSSIBLE CAUSE
•  Information display/multi information display internal malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
CONFIRM INFORMATION DISPLAY/MULTI INFORMATION DISPLAY DTC
•  Clear the DTC from information display/multi information display using the M-MDS.
•  Switch the ignition to ON.
•  Perform the “DTC INSPECTION”.
•  Is the same DTC present?
Yes
Replace the information display/multi information display, then go to the next step.
(See INFORMATION DISPLAY REMOVAL/INSTALLATION.)
(See MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION.)
No
Go to the next step.
2
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY].)
No
DTC troubleshooting completed.