SOLENOID VALVE REMOVAL/INSTALLATION[FN4A-EL]

id0517a1804600

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[ZJ, ZY, Z6].) (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

2.  Disconnect the negative battery cable.

3.  Remove the under cover.

4.  Remove the control valve body. (See CONTROL VALVE BODY REMOVAL[FN4A-EL].)

5.  Remove the solenoid valve(s).

am3zzw00001239

6.  Apply ATF to a new O‐ring and install it on the solenoid valve.

7.  Install the solenoid valve in the control valve body.

am3zzw00001240

Tightening torque
7.8—10.8 N·m {80—110 kgf·cm, 69.5—95.4 in·lbf}

8.  Install the control valve body. (See CONTROL VALVE BODY INSTALLATION[FN4A-EL].)

9.  Install the under cover.

10.  Connect the negative battery cable.

11.  Install the battery cover. (See BATTERY REMOVAL/INSTALLATION[ZJ, ZY, Z6].) (See BATTERY REMOVAL/INSTALLATION[LF, L3].)

12.  Add ATF and, with the engine idling, inspect the ATF level and inspect for leakage. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION[FN4A-EL].)

13.  Perform the mechanical system test. (See MECHANICAL SYSTEM TEST[FN4A-EL].)

14.  Perform the road test. (See ROAD TEST[FN4A-EL].)