FRONT DOOR REMOVAL/INSTALLATION

id091100800200

1.  Disconnect the negative battery cable.

2.  To remove the checker, remove the following parts:

(1)  Inner garnish (SeeINNER GARNISH REMOVAL/INSTALLATION.)

(2)  Regulator handle (Vehicles with manual window system) (SeeREGULATOR HANDLE REMOVAL.) (SeeREGULATOR HANDLE INSTALLATION.)

(3)  Front door trim (SeeFRONT DOOR TRIM REMOVAL/INSTALLATION.)

(4)  Front door speaker (SeeFRONT DOOR SPEAKER REMOVAL/INSTALLATION.)

3.  To remove the front door hinges, remove the following parts:

(1)  Windshield wiper arm and blade (SeeWINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

(2)  Cowl grille (SeeCOWL GRILLE REMOVAL/INSTALLATION.)

(3)  Front bumper (SeeFRONT BUMPER REMOVAL/INSTALLATION.)

(4)  Front combination lights (SeeFRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(5)  Side step molding (Vehicle with the side step molding) (SeeSIDE STEP MOLDING REMOVAL/INSTALLATION.)

(6)  Front fender panel (SeeFRONT FENDER PANEL REMOVAL/INSTALLATION.)

4.  Remove in the order indicated in the table.

5.  Adjust the front door. (SeeDOOR ADJUSTMENT.)

6.  Install in the reverse order of removal.

am3zzw00002241

1	Connector (SeeConnector Removal Note.)
2	Bolt A
3	Bolt B
4	Front door
5	Bolt C
6	Checker
7	Bolt D
8	Front door hinge

Connector Removal Note

1.  Pull down the lever in the direction indicated by the arrow and disconnect the connector.

am3zzw00002242