COIL ANTENNA REMOVAL/INSTALLATION [KEYLESS ENTRY SYSTEM]

id0914008049b3

Note

•  Do not remove the coil antenna unless you are replacing it.

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Bonnet release lever (SeeBONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION [L.H.D.].) (SeeBONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION [R.H.D.].)

(2)  Front scuff plate (Driver’s side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Front side trim (Driver’s side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(4)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(5)  Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(6)  Outer cylinder (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

3.  Disconnect the coil antenna connector.

am3zzw00004513

4.  Detach the steering lock tabs from the holes on the coil antenna.

5.  Install in the reverse order of removal.