THEFT-DETERRENT SIREN REMOVAL/INSTALLATION[4SD]

id0914008095d3

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(2)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(4)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)  Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

am3zzw00002776

1	Bolt
2	Theft-deterrent siren
3	Connector

4.  Install in the reverse order of removal.