ROOF CARRIER BRACKET REMOVAL/INSTALLATION

id091600801700

1.  Remove the following parts:

(1)  Console (4SD) (See CONSOLE REMOVAL/INSTALLATION.)

(2)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Upper anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)  B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(9)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(10)  Trunk side upper trim (5HB) (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(11)  C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(12)  Map light (See MAP LIGHT REMOVAL/INSTALLATION.)

(13)  Interior light (See INTERIOR LIGHT REMOVAL/INSTALLATION.)

(14)  Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)

(15)  Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)

(16)  Headliner (See HEADLINER REMOVAL/INSTALLATION.)

(17)  Roof molding (See ROOF MOLDING REMOVAL.) (SeeROOF MOLDING INSTALLATION.)

2.  Remove the nuts.

am3zzw00002309

3.  Remove the roof carrier bracket.

4.  Install in the reverse order of removal.

Note

•  Install the roof carrier bracket so that the arrow on it faces inward.