FLOOR COVERING REMOVAL/INSTALLATION

id091700803000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front seat (See FRONT SEAT REMOVAL/INSTALLATION.)

(2)  Audio amplifier (Bose) (See AUDIO AMPLIFIER REMOVAL/INSTALLATION.)

(3)  Woofer (Bose) (See WOOFER REMOVAL/INSTALLATION.)

(4)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(5)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(7)  Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(8)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(9)  B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(10)  Lower anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(11)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(12)  Fuel-filler lid opener lever cover (See FUEL-FILLER LID OPENER REMOVAL/INSTALLATION[L.H.D.].)(See FUEL-FILLER LID OPENER REMOVAL/INSTALLATION[R.H.D.].)

(13)  Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

3.  Remove fasteners A, B, and C.

am3zzw00001936

4.  Take the floor covering out from the opened door.

5.  Install in the reverse order of removal.