SPARK PLUG REMOVAL/INSTALLATION [SKYACTIV-G 2.0]


id0118h6800400

Caution
•  If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

4.  Remove the plug hole plate bracket. (See TIMING CHAIN REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

5.  Remove the ignition coils. (See IGNITION COIL/ION SENSOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

6.  Remove the spark plugs using a plug-wrench.

7.  Install in the reverse order of removal.

Tightening torque
15—20 N·m {1.6—2.0 kgf·m, 12—14 ft·lbf}