NO.2 ABS WARNING LIGHT DOES NOT ILLUMINATE WITH SWITCH THE IGNITION TO ON [ABS]
id0403a5950400
|
2 |
ABS warning light does not illuminate with switch the ignition to ON |
|---|---|
|
Possible cause
|
• Instrument cluster malfunction
• ABS CM internal malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM ABS HU/CM DTC
• Retrieve the ABS HU/CM DTC using the M-MDS.
(See ON-BOARD DIAGNOSIS [ABS].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See ON-BOARD DIAGNOSIS [ABS].)
|
|
No
|
Go to the next step.
|
||
|
2
|
CONFIRM INSTRUMENT CLUSTER DTC
• Retrieve the instrument cluster DTC using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT WHETHER MALFUNCTION IS IN ABS HU/CM OR INSTRUMENT CLUSTER
• Turn on all the warning light and indicator light using the M-MDS simulation function WL+IL.
• Does the ABS warning light illuminate?
|
Yes
|
Replace the ABS CM (ABS CM internal malfunction).
|
|
No
|
Replace the instrument cluster.
|
||