BASIC INSPECTION [FS5A-EL]

id050308800300

STEP

INSPECTION

ACTION

1

Perform the mechanical system test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the mechanical system normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

2

Switch the ignition to ON.

When the selector lever is moved, does the gear position indicator light indication correspond to the selector lever position?

Also, when other ranges are selected from N or P during idling, does the vehicle move within 1—2 s?

Yes

Go to the next step.

No

Inspect the selector lever and TR switch.

(See SELECTOR LEVER INSPECTION.)

(See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].)

If the selector lever and/or TR switch have a malfunction:

•  Repair or replace malfunctioning parts.
(See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(See TRANSAXLE RANGE (TR) SWITCH REMOVAL/INSTALLATION [FS5A-EL].)

If the selector lever and TR switch are normal:

•  Go to the next step.

3

Inspect the ATF color and condition.

(See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FS5A-EL].)

Are the ATF color and odor normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

Flush the ATX and cooler line if necessary.

4

Perform the line pressure test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the line pressure normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

5

Perform the stall test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the stall speed normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

6

Inspect the following PCM and TCM PID values using the M-MDS:

(See ON-BOARD DIAGNOSTIC TEST [MZR 2.0, MZR 2.5].)

(See ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR INSPECTION [FS5A-EL].)

PCM PIDs:

•  APP

•  ECT

•  RPM

•  VPWR

TCM PIDs:

•  TFT

•  TFTV

•  TR

•  TR_SENS

•  MNL SW

•  DWN SW

•  UP SW

•  THOP

•  TSS

•  OSS

•  VPWR

Are the PID values normal?

(See PCM INSPECTION [MZR 2.0, MZR 2.5].)

Yes

Perform the symptom troubleshooting and follow the procedures.

No

Repair or replace any malfunctioning parts according to the inspection result.

STEP	INSPECTION		ACTION
1	Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the mechanical system normal?	Yes	Go to the next step.
1		No	Repair or replace any malfunctioning parts according to the inspection result.
2	Switch the ignition to ON. When the selector lever is moved, does the gear position indicator light indication correspond to the selector lever position? Also, when other ranges are selected from N or P during idling, does the vehicle move within 1—2 s?	Yes	Go to the next step.
2		No	Inspect the selector lever and TR switch. (See SELECTOR LEVER INSPECTION.) (See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].) If the selector lever and/or TR switch have a malfunction: • Repair or replace malfunctioning parts. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See TRANSAXLE RANGE (TR) SWITCH REMOVAL/INSTALLATION [FS5A-EL].) If the selector lever and TR switch are normal: • Go to the next step.
3	Inspect the ATF color and condition. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FS5A-EL].) Are the ATF color and odor normal?	Yes	Go to the next step.
3		No	Repair or replace any malfunctioning parts according to the inspection result. Flush the ATX and cooler line if necessary.
4	Perform the line pressure test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the line pressure normal?	Yes	Go to the next step.
4		No	Repair or replace any malfunctioning parts according to the inspection result.
5	Perform the stall test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the stall speed normal?	Yes	Go to the next step.
5		No	Repair or replace any malfunctioning parts according to the inspection result.
6	Inspect the following PCM and TCM PID values using the M-MDS: (See ON-BOARD DIAGNOSTIC TEST [MZR 2.0, MZR 2.5].) (See ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR INSPECTION [FS5A-EL].) PCM PIDs: • APP • ECT • RPM • VPWR TCM PIDs: • TFT • TFTV • TR • TR_SENS • MNL SW • DWN SW • UP SW • THOP • TSS • OSS • VPWR Are the PID values normal? (See PCM INSPECTION [MZR 2.0, MZR 2.5].)	Yes	Perform the symptom troubleshooting and follow the procedures.
6		No	Repair or replace any malfunctioning parts according to the inspection result.