DOWN SWITCH INSPECTION [FW6A-EL]

id0517h1600600


Continuity Inspection

Note
•  The down switch is built into the selector lever component.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3.  Remove the console. (See CONSOLE REMOVAL/INSTALLATION.)

4.  Disconnect the selector lever component connector.

am3zzw00012706

5.  Verify that the continuity between selector lever component terminals C and H.

am3uuw00008694

•  If not as verified, replace the selector lever component. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

Down switch specification

Test condition

Continuity
Selector lever is in the M position (−) side position.
Continuity
Selector lever is not in the M position (−) side position.
No continuity