HEADLIGHT LEVELING SWITCH INSPECTION

id091800803700

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Remove the headlight leveling switch. (See HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION.)

3.  Verify that the resistance and continuity between the headlight leveling switch terminals is as indicated in the table.

am3uuw00007149

am3uuw00007150

•  If not as indicated in the table, or if the resistance is not within the specification, replace the headlight leveling switch.

4.  Apply battery voltage to headlight leveling switch terminal E, and connect terminal A to ground.

5.  Verify that the LED illuminates.

•  If there is any malfunction, replace the headlight leveling switch.