AUTO LEVELING SENSOR REMOVAL/INSTALLATION

id091800805700

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Lift up the vehicle.

3.  Disconnect the quick release connector. (charcoal canister side) (See CHARCOAL CANISTER REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See CHARCOAL CANISTER REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

4.  Remove in the order indicated in the table.

am3zzw00011641

1	Bolt
2	Connector
3	Auto leveling sensor

5.  Install in the reverse order of removal.

6.  Perform the headlight auto leveling system initialization. (See HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION.)