REAR CENTER SEAT BELT REMOVAL/INSTALLATION [WGN]

id0811008009c7

Caution

•  The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable and wait for 1 min or more.

3.  Partially peel back the seaming welt.

4.  Remove the rain sensor cover. (Vehicles with auto light / wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION.)

5.  Disconnect the rain sensor connector. (Vehicles with auto light / wiper system)

6.  Remove the following parts:

(1)  Sunroof seaming welt (vehicles with sunroof)

(2)  A-pillar trims (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Upper anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  B-pillar lower trims (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)  B-pillar upper trims (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)  Tire house trims (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(9)  Trunk side upper trims (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(10)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION [5HB/WAGON].)

(11)  Lower anchor of the rear seat belt installation bolts (LH) (See REAR SEAT BELT REMOVAL/INSTALLATION [5HB, WGN].)

(12)  C-pillar trims (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(13)  D-pillar trims (See D-PILLAR TRIM REMOVAL/INSTALLATION.)

7.  Disconnect the auto-dimming mirror connector. (Vehicles with auto-dimming mirror)

8.  Remove the sunvisors. (See SUNVISOR REMOVAL/INSTALLATION.)

9.  Remove the map light. (See MAP LIGHT REMOVAL/INSTALLATION.)

10.  Remove the assist handles. (See ASSIST HANDLE REMOVAL/INSTALLATION.)

11.  Remove the headliner. (See HEADLINER REMOVAL/INSTALLATION.)

12.  Remove the bolts.

am6zzw00006735

13.  Remove the rear center seat belt.

14.  Install in the reverse order of removal.