REAR SPEAKER INSPECTION
id092000802500
4SD
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)
-
- (2) Rear seat side back (See REAR SEAT SIDE BACK REMOVAL/INSTALLATION.)
-
- (3) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
-
- (4) C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
-
- (5) High-mount brake light (See HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION.)
-
- (6) Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
-
- (7) Rear speaker (See REAR SPEAKER REMOVAL/INSTALLATION.)
-
3. Verify that the resistance between the front center speaker terminals is as indicated in the table.
-
• If not as indicated in the table, replace the front center speaker.
WGN
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
-
- (2) Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)
-
- (3) Trunk side pocket (See TRUNK SIDE POCKET REMOVAL/INSTALLATION.)
-
- (4) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
-
- (5) Rear speaker (See REAR SPEAKER REMOVAL/INSTALLATION.)
-
3. Verify that the resistance between the front center speaker terminals is as indicated in the table.
-
• If not as indicated in the table, replace the front center speaker.
