CONDENSER REMOVAL/INSTALLATION

id092000803000

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Rear seat cushion (LH) (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(3)  Rear side seat back (LH) (See REAR SEAT BACK REMOVAL/INSTALLATION.)

(4)  Tire house trim (LH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(5)  C-pillar trim (LH) (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the connector.

am6zzw00010217

4.  Remove the bolt.

5.  Remove the condenser.

6.  Install in the reverse order of removal.