DTC U0415:68 [INSTRUMENT CLUSTER]
id0902e8989000
|
DTC U0415:68 |
Signal error from ABS HU/CM or DSC HU/CM |
|---|---|
|
Detection Condition
|
Correct data cannot be received from ABS HU/CM or DSC HU/CM
|
|
Possible Causes
|
ABS HU/CM or DSC HU/CM malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
INSPECT ABS HU/CM OR DSC HU/CM FOR MALFUNCTION
• Switch the ignition to off.
• Connect the M-MDS to the DLC-2.
• Perform the ABS HU/CM or DSC HU/CM DTC inspection using the M-MDS.
(See ON-BOARD DIAGNOSIS [ABS].)
• Is the DTC displayed again?
|
Yes
|
Go to the applicable DTC inspection.
(See ON-BOARD DIAGNOSIS [ABS].)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT NO OTHER DTCs ARE RECORDED
• Clear DTCs using the M-MDS.
• Perform the instrument cluster DTC inspection using the M-MDS.
• Is DTC U0415:68 displayed?
|
Yes
|
Replace the ABS HU/CM or DSC HU/CM.
|
|
No
|
DTC troubleshooting completed.
|
||