NOISE FILTER INSPECTION
id092000806500
Brake Light Noise Filter
1. Disconnect the negative battery cable.
2. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)
3. Verify the resistance and continuity between the brake light noise filter terminals.
-
• If the resistance is not as indicated in the table, replace the vehicle wiring harness.
Rear Defroster Noise Filter
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)
- (2) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (3) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
- (4) Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION.)
- (5) Rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
- (6) Rear package center trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
- (7) Rear defroster noise filter (See NOISE FILTER REMOVAL/INSTALLATION.)
3. Verify the resistance and continuity between the rear window defroster noise filter terminals.
-
• If the resistance is not as indicated in the table, replace the rear window defroster noise filter.