No.4 GLASS PANEL NOISE DURING OPERATION


id0903b4814700

POSSIBLE CAUSE

• Glass panel

• Sunroof unit rail, guide, or channel

• Rear guide pin

• Deflector

• Sunroof motor

Diagnostic Procedure

STEP

INSPECTION

ACTION

1

INSPECT GLASS PANEL FOR OBSTRUCTIONS AND DAMAGE

Inspect the glass panel for obstructions and damage.
Are there any obstructions and damage?
Yes
Remove all the obstructions. Repair the glass panel if necessary.
Inspect the system for normal operation.
No
Go to the next step.
2

INSPECT GLASS PANEL OPERATION

Inspect the glass panel during operation.
Is the glass panel loose or incorrectly adjusted?
Yes
Adjust the glass panel. (See GLASS PANEL ADJUSTMENT.)
Inspect the system for normal operation.
No
Go to the next step.
3

INSPECT GLASS PANEL TRACKS

Open the glass panel.
Inspect the glass panel tracks for obstructions and damage.
Are the glass panel tracks normal?
Yes
Go to the next step.
No
Remove all the obstructions. Repair any damage if necessary. Inspect the system for normal operation.
4

INSPECT SUNSHADE

Inspect the sunshade for normal operation.
Does the sunshade operate normally?
Yes
Go to the next step.
No
Remove the sunshade and reinstall. (See SUNSHADE REMOVAL/INSTALLATION.)
Inspect the system for normal operation.
5

INSPECT SUNROOF MOTOR

Gain access to the sunroof motor.
Open the glass panel.
Does the motor make excessive noise?
Yes
Install a new sunroof motor. (See SUNROOF MOTOR REMOVAL/INSTALLATION.)
Inspect the system for normal operation.
No
Adjust the glass panel. (See GLASS PANEL ADJUSTMENT.)
Inspect the system for normal operation.