Connecting Rod Refinishing Dimensions
| Center of Conrod Bearing Bore to Center of Conrod Bush Bore (L) | 148.950 - 149.050 |
| Width of Conrod at Conrod Bearing Bore (B) | 24.857 - 24.890 |
| Width of Conrod at Conrod Bush Bore (b) | 21.900 - 22.100 mm |
| Basic Bore for Conrod Bearing Shells (D) | 51.600 - 51.619 |
| Basic Bore for Conrod Bush (d) | 27.000 - 27.210 |
| Conrod Bush ID (d1) | 24.007 - 24. 013 mm |
| Piston Play in Conrod Bush | 0.007 - 0.018 |
| Peak to Valley Height of Conrod Bush on Inside | 0.005 mm |
| Permissible Twist of Conrod Bearing Bore Relative to Conrod Bush Bore | 0.15 |
| Permissible Variation of Parallelism of Conrod Bearing Bore to Conrod Bush Bore | 0.07 |
| Permissible Variation of Conrod Bearing Bore from Roughness | 0.01 mm |
| Permissible Difference in Weight of Complete Conrod within an Engine | 4 |