Engine Control Module: Service and Repair

Injection system control module (N3), depending on version: IFI control module (N3/7), DFI control module (N3/8), engine control module (HFM-SFI) (N3/4), CDI control module (N3/9), engine control module (ME-SFI) (N3/10) and traction Systems control module (N47)


NOTE: The CFI control module (N3) and traction system control module (N47) are mounted on one bracket (5) and must always be removed together.


1 Release connector (3) on CFI control module (N3).
2 Pivot connector (3) to side until the multi point male connector is released from the CFI control module (N3).
3 Pull sliding lock (located below lead entrance) on both connectors (4) on tradition systems control module (N47) out to stop and remove connectors.
4 Unscrew screw (7) and pull mount (5) together with the two control modules up and out of control module box guides.