Operation CHARM: Car repair manuals for everyone.
Home >> Mercedes Benz >> 2000 >> E 430 (210.070) V8-4.3L (113.940) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Remove/Install Fuse Box In Trunk
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Remove/Install Fuse Box In Trunk









Removal, installation
1.1 Remove rear seat
- Sedan

1.2 Fold rear seat forward and remove battery compartment cover
- T-model

2 Disconnect ground cable from battery


CAUTION: Insulate cable terminal on ground lead for protection against unintentional contact between disconnected ground lead and ground connection point W10


3 Unclip fuse blocks (A, B and C)
4 Unscrew nuts (1)
5 Remove rear fuse box (F4)


NOTE: For this purpose guide fuse blocks (A and B) downward out of fuse box


6 Disconnect leads on fuse boxes or fuse blocks
Refer to Special Tool below


CAUTION: Disconnect leads only when changing entire fuse box. To avoid mix-ups bind disconnected leads for individual fuse blocks together and mark.


Connect leads on fuse boxes or fuse blocks

Fuse block assignment and lead connections
- Model 210

7 Reinstall in opposite order





pro multis · About Operation CHARM